Hangzhou Holin Plastic Machinery Co.,Ltd
Hot Products
Home > News > Content

The Vacuum Packaging Machine Should Be In The Temperature -10 ℃ -50 ℃

  1, the vacuum packaging machine should be in the temperature -10 ℃ -50 ℃, relative humidity of not more than 85%, the surrounding air without corrosive gases, no dust, no explosive use of the environment. Like the baler and shrink machine, the vacuum packaging machine for the three-phase 380V power supply.

  2, for the vacuum packaging machine to ensure that the vacuum pump work, vacuum pump motor is not allowed to reverse. Should always check the three-dimensional transparent tea film packaging unit, the normal oil level for the oil window 1 / 2-3 / 4 (can not exceed), when the vacuum pump water or oil color black, this time should replace the new oil (Generally continuous work one or two months to replace once, with 1 # vacuum gasoline or 30 # gasoline, oil can also).

  3, impurity filter should always wash and wash (usually 1-2 months cleaning time, such as packaging fragmented objects should be shortened cleaning time).

  4, continuous work 2-3 months should open the back cover 30 on the sliding parts and switch touch block plus lubricating oil, the heating rod on the connection activities should be depending on the use of oil lubrication.

  5, on the decompression, filtration, oil mist triple 24 to always check to ensure that oil mist, oil cup with oil (sewing machine oil), filter cup without water.

  6, heating bars, silicone strips to keep clean, not sticky foreign body, so as not to affect the quality of sealing.

  7, heating rods, heating the next two layers of paste from the insulation role, when there is damage should be replaced in time to avoid short circuit.

  8, the user-owned work gas source and inflatable gas source, vacuum packaging machine working pressure has been set to 0.3MPa, more appropriate, no special circumstances do not adjust too much.

  9, the vacuum packaging machine in the handling process is not allowed to tilt and impact, but can not put down handling.

  10, vacuum packaging machine in the installation must have a reliable grounding device.

  11, is strictly prohibited hands into the heating bar, to prevent injury, emergency situations immediately cut off the power.

  12, the first ventilation when the power, the first power off after the power off.

  • Company Profile
    Holin Plastic Machinery is one of the best CE certification plastic machine manufacturers and suppliers, please feel free to order plastic machine, package machine, package mould of high-quality through our website....
  • Product Category
  • Contact Us
    Address:#386, Tongyun Street, Yuhang District, Hangzhou City, China 311112
    Tel: +86-571-88747709
    Fax: +86-571-88747711
Copyright ©Hangzhou Holin Plastic Machinery Co.,Ltd All rights reserved.